Business Residential Customer Service: 1.888.682.1884    Technical Support: 1.877.288.8389  
Visionary
Search


Browse By Category

Visionary Support Knowledge Base
Knowledge Base

Windows 2000 Professional Dial-Up Setup

Problem Setting the Internet up on Windows 2000 Professional.

Solution The steps below will walk you through setting up the internet for Visionary on Windows 2000 Professional.

Setup for Dialup Access

  1. Click Start
  2. Click Settings
  3. Click Control Panel
  4. Open Network and Dial-up Connections
  5. Open Make New Connection
  6. New Connection Wizard
    • Click Next
  7. Network Connection Type
    • Click "Dial-Up to the Internet" (the second item)
    • Click Next
  8. Internet Connection Wizard
    • Click "I want to set up my Internet connection manually" (the third item). If it is not giving you this choice, you may have upgraded Internet Explorer. In that case follow the instructions here, from step 6 or 7 onward, to get through the wizard.
    • Click Next
  9. Setting up your Internet Connection
    • Click "I connect through a phone line and a modem"
    • Click Next
  10. Internet Account Connection Information
    • Uncheck "Use Area Code and Dialing Rules"
    • Telephone Number: xxx-xxxx (Your Visionary Dial-Up Number)
    • Click Advanced
  11. Advanced Connection Properties
    • Click Addresses
    • Skip IP Address
      • Click "Internet service provider automatically provides one"
    • DNS Server Address
      • Click "Always use the following"
      • Primary DNS server: 209.193.72.2
      • Alternet DNS server: 209.193.68.2
      • Click Ok
    • Click Next
  12. Internet Account Logon Information
    • Username: xxxxx (Your Visionary Username)
    • Password: xxxxx (Your Visionary Password)
    • Click Next
  13. Configuring Your Computer
    • Connection Name: Visionary or VCN
    • Click Next
  14. Set Up Your Internet Mail Account
    • Click No (If you need to set up email it can be done afterwards)
    • Click Next
  15. Completing the Internet Connection Wizard
    • Uncheck "To connect to the Internet Immediately"
    • Click Finish
  16. Inside Network and Dial-Up Networking
    • Right Click Visionary (what you named the connection)
    • Click Create Shortcut
    • When Prompted Click Yes
    • Close out of all opened Windows
This should setup your dialup for Visionary and setup a connection on the desktop that you can use to connect to the internet with.

How helpful was this article to you?

Related Articles

article Setting the Internet up on Windows 2000 Professional
Problem – Setting the Internet up on Windows 2000 Professional. Solution – The steps below will walk you through setting up the internet for Visionary on Windows 2000 Professional. Setup for...

  June 24, 2004    Views: 3466   
article Windows XP Dial-Up Setup
Problem – Setting the Internet up on Windows Experience (XP) Solution – The steps below will walk you through setting up the internet for Visionary on Windows Experience (XP)

  July 26, 2005    Views: 4786   
article Enabling & Disabling Terminal Window in Windows 2000 Professional
See Pre-Dial and Post-Dial Terminal Window Article for information regarding using terminal window.Enabling & Disabling Pre-Dial Terminal WindowOpen My Computer Open Control PanelOpen Network...

  August 11, 2004    Views: 3080   

User Comments

Comment lily
August 16, 2005 at 9:58am

none
i just say thinks a lot od this