Business Residential Customer Service: 1.888.682.1884    Technical Support: 1.877.288.8389  
Visionary
Search


Browse By Category

Visionary Support Knowledge Base
Knowledge Base

How to Enable Remote Management on Your Linksys Router.

Issue: You need to enable Remote Management on your Linksys router (This feature can be used configure your router from outside your Local Area Network).

Solution: The following steps will guide you threw enabling Remote Management on your Linksys router.

  1. Open Internet Explorer and go to IP Address 192.168.1.1
  2. Leave the username field blank and enter in the password admin, by default the Linksys router has no usename unless one has been previously set.
  3. Click Advanced.
  4. Now at the bottom of the filters section enable Remote Management.
  5. Click Apply.

You have now successfully enabled Remote Management on your Linksys router. If you have not set a password on your Linksys router yet, it is highly suggested to set a unique username and password on your router.

For more information on our in home network policy click HERE


How helpful was this article to you?

Related Articles

article How to Enable Remote Management on your D-Link Router
Issue: You need to enable Remote Management on your D-Link router (This feature can be used configure your router from outside your Local Area Network). Solution: The following steps will guide...

  July 6, 2004    Views: 19728   
article Configuring Linksys Router for Wireless Broadband Connection.
 Configuring Linksys RoutersProblem: You need to configure your Linksys Router. Solution: The steps below will walk you through the configuration of the Linksys router.Open Internet Explorer and...

  July 5, 2004    Views: 9168   
article How to Set a Password on Your Linksys Router
Problem: You need to set the password on your Linksys router for added security to your network. Solution: The steps below will guide you threw setting a password for your Linksys router Open...

  July 5, 2004    Views: 4210   

User Comments

No comments have been posted.